Combustion Air Slide Valve; Regulation Of Combustion Air; Convection Air Slide Valve - Olsberg Kaminofen Tenorio PowerSystem Compact Manual De Instrucciones

Combustion air slide valve

Operating lever for combustion air supply
● Operating lever on „0":
all slide valves closed
● Operating lever on „I":
Secondary air slide valve completely open /
Primary air slide valve completely closed
● Operating lever on „II":
Secondary air slide valve completely open /
Primary air slide valve completely open

Regulation of combustion air

Position of operating lever:
„II" ....Ignition position, max. heat output
„I" .....Nominal heat output with billet wood
„I" .....Nominal heat output with wood briquettes
„0" ....Obtain glow
● As the secondary air also contributes to the cleanli-
ness of the glass pane, the operating lever should be
set on "I" minimum. This also applies in the event of
low-load operation.
● When not operating the lever should be set on "0", to
reduce the cooling down of the room.
16

Convection air slide valve

Operating lever for the convection air
The operating lever for the convection air is up above
to the right on the back wall of the stove.
Operating lever setting:
„II" ...Slide valve completely open
„I" ....Slide valve 1/2 open
„0" ...Slide valve closed
● If you want the room where the stove is installed to
warm quickly, set the lever to „II".
● If you want to store the heat, set the lever to „0".