Fein WSG7-115 Manual Del Usaurio página 17

OBJ_BUCH-0000000194-003.book Page 17 Friday, December 11, 2015 12:00 PM
Adjustments.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Adjusting the wheel guard (figure 5).
Loosen the clamping screw.
Turn the wheel guard to the requested work-
ing position, then clamp the wheel guard with
the clamping screw.
Turning the gear head
Carefully turn the gear head to the new posi-
tion without removing it from the housing.
Fig. 5
2.
1.
Clamping screw
3.
en
17
Wheel guard