Installation Requirements; Location Requirements - Haier HC46SF10SV Manual Del Usuario

Ocultar thumbs Ver también para HC46SF10SV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION REQUIREMENTS

LOCATION REQUIREMENTS

Keep flammable materials and vapors, such as gasoline, away from
appliance.
Failure to do so can result in death, explosion or fire.
Recommended Clearances:
Your refrigerator is designed for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C).
It is recommended that you do
not install the refrigerator in
direct sunlight or near a heat
source e.g. radiators, baseboard
heaters, cooking appliances etc.
Place the refrigerator on a floor
strong enough to support it fully
loaded. If the floor is uneven,
adjust the leveling legs so that
the refrigerator is level. See
"Level Refrigerator."
IMPORTANT: This refrigerator is designed for freestanding installation
only. It should not be recessed or built-in an enclosed cabinet. To ensure
your refrigerator works at optimum efficiency, you should install it in a
location where there is proper air circulation, and electrical connections.
LOCATION REQUIREMENTS
• Do not install the refrigerator where the temperature will go below
55°F (13°C) because it will not run often enough to maintain proper
temperatures.
• Do not install the refrigerator where the temperature will go above
110°F (43°C) because it will not perform properly.
• Install it on a floor strong enough to support it fully loaded.
• Do not install the refrigerator in a location exposed to water (rain,
etc.) or direct sunlight.
49-60797
WARNING
Explosion and Fire Hazard
4"
(10.2 cm)
4"
(10.2 cm)
4"
(10.2 cm)
7

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido