Before First Use; Care Instructions - Kinu M47 Phoenix Manual Del Usuario

ENGLISH
Thank you for purchasing Kinu M47 Phoenix, excellent
choice!
Your new grinder is equipped with Black Fusion treated
and hardened conical burrs of - 47 / 32mm and each,
with 4 ball bearings.
It is a high-quality and sturdy coffee grinder, allowing
you to achieve very uniform grinding results for all
preparation methods with little effort.
Your coffee grinder has a stepless adjustment with a
fine thread (M10 x 0.5) and 50 subdivisions. For each
division, you adjust the grinding distance by 0.01mm.
Take a few minutes to read this manual; you will
avoid dangers or damage to the coffee grinder.
Kinu Grinders LLC assumes no liability for damage
or injury caused by improper use, or bad repair. All
warranty claims are invalid.
Use the grinder only for its intended purpose (grinding
whole, roasted coffee beans).

BEFORE FIRST USE

Unscrew counter-screw (1) counter-clockwise. Mount
the handle (2) by passing it through the drive hub (3).
Then turn the lock screw (1) clockwise.
Your coffee grinder is now ready to use.
For the fine adjustment, turn the counter-screw
(1) counterclockwise out (about 2 turns). Turn the
adjustment wheel (4) out, to the desired grinding degree
setting and then turn the lock screw (1) clockwise again.
If your coffee grinder should grind too coarse, repeat the
process and turn the adjustment wheel (4) clockwise.
Now your mill should grind finer.
Please make sure that the lock screw (1) is tightened
every time. If too lightly tightened, the grinder can
otherwise adjust by itself during the grinding process.

CARE INSTRUCTIONS

The coffee grinder can be cleaned with commercially
available cleaning agents.
If the mill is used daily, the grinder should ONLY be
cleaned with a dry brush. Proper cleaning allows the
best grinding results and the best taste in the cup.
4