Parental Control - Nevir NVR-7502-40HD-N Manual De Instrucciones

Language Settings
In the configuration menu, highlight the Language
Settings item by pressing " " or " " buttons. Press
OK and Language Settings submenu will be displayed
on the screen:
Use " " or " " buttons to highlight the menu item
that will be adjusted and then press " " or " " button
to set.
Notes:
• System Language determines the on-screen menu
language.
• Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.

Parental Control

To prohibit viewing of certain programmes, channels
and menus can be locked by using the parental
control system.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Press "MENU" button and select the icon by using "
" or " " button. Press OK button to view the Settings
menu. Use " " or " " button to highlight Parental
and press OK to continue:
To display parental lock menu options, the PIN number
should be entered. The factory default PIN number
is 0000. After coding the correct PIN number, the
parental settings menu will be displayed:
Parental Settings Menu Operation
• Select an item by using "
• Use " " or " " button to set an item.
• Press OK button to view more options.
(*) If you set Country option as UK in the first time
installation, Maturity Lock option will not be visible.
This setting is available only for EU countries.
Menu Lock (optional): Menu lock setting enables or
disables the menu access. You can disable access to
the installation menu or the whole menu system.
Maturity Lock (optional): When set, this option
gets the maturity information from the broadcast and
if this maturity level is disabled, disables access to
the broadcast.
Child Lock (optional): When Child Lock is set, the
TV can only be controlled by the remote control. In
this case the control panel buttons will not work,
except for the Standby/On button. When Child Lock
is activated you are able to switch the TV into Standby
mode with the Standby/On button. To switch the TV
on again, you need the remote control. Hence, if one
of those buttons is pressed, Child Lock Is On will
be displayed on the screen when the menu screen
is not visible.
Set PIN: Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to enter your new pin a second time for verification
purposes.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
English - 109 -
(*)
" or " " button.