Important Safety Information
This device is manufactured in compliance with safety regulations. Usage
against the roles causes harm to person and device. Please read the User Ma-
nual carefully before operating the device. You will find important information
inside the User Manual regarding mounting, safety, usage and maintenance.
Thus you will both protect yourself and prevent the device from coming to
harm.
•
If the power cord is damaged, it must be replaced by the manufacturer or
its service agency or a personnel qualified in the same degree to prevent a
dangerous situation.
•
It must be checked whether there are breaks or deformations on the hea-
ting element present on the device. If glass panels are damaged, the heater
must not be used. Authorized service must be called.
•
It must be ensured that the main power is 230V AC, 50/60 Hz and the power
line is connected to the fuse. Mains safety must be checked. Fuse must be
16 Amperes.
•
Your device must be used with grounded socket and grounded socket must
be outside the heater area and the hot surface.
•
Also, it must be checked whether the socket is loose or damaged. Because
loose sockets damage the device and the power main.
•
Your device must not be used connected to the same power cable or fuse
with another device.
•
Power cord must not be left on the hot body of the device or near it.
•
If your device will not be used for a long period of time, if cleaning or
maintenance will be conducted, the device must be unplugged. It must be
ensured that the device has cooled down.
•
The device is not intended for use by persons (including children) with
reduced physical, sensory an mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concer-
ning the use of the appliance by a person responsible for their safety.
GB
VASNER
15