Metra 95-9700 Instrucciones De Instalación

KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) (4) #8 x 3/8" Phillips screws • D) (4) #10-32 x 1/2" Phillips steel machine screws
• E) Axxess interface (not shown) • F) ASWC-1 interface (not shown)
A B
The World's best kits.
®
Harley-Davidson Street Glide, Electra Glide,
Ultra, and Limited models
Road Glide 2015-Up*
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DDIN radio provision*
• Axxess interface included
• ASWC-1 included, for retention of handlebar controls
• Antenna adapter included
* This kit can only be used with an ISO DDIN radio that has an "L" shaped chassis
design, with the radio chassis at the top of the screen. At present only the Sony
XAV-AX100, XAV-AX200, and XAV-AX5000 radios have this design.
C
MetraOnline.com
2014-Up* /
D
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
95-9700
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Fairing Disassembly
– Harley Davidson Street Glide, Electra Glide,
Ultra, and Limited models 2014-Up .............2-3
– Harley Davidson Road Glide 2015-Up .............4
Kit Assembly ..........................................................5
Final Assembly .......................................................8
Axxess Interface Installation .............................6-11
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Axxess interface and harness included
Antenna Adapter: Included
Handlebar controls interface: Included
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdrivers • Allen wrenches
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 9/10/20 INST95-9700