Lenze L−force CS 5800 Instrucciones Para El Montaje página 34

4 Installation
Mounting steps
Fixing the mounting frame to the wall
With add−on component

160
0
70
„
†
How to proceed:
1. Prepare the wall for mounting the wall bracket 0.
–
The mounting location and the installation material must provide for a
permanent mechanical connection.
2. Stick the self−adhesive seal 1 on the adapter plate 2 on the side with the
threaded bolts.
3. Screw the wall bracket 0 and the adapter plate 2 to the swivel adapter 3.
2 x 4 countersunk head screws M5 x 16 mm with washers Æ 5.3 mm
–
and nuts M5
4. Pull the connecting cable through the swivel adapter 3 and screw the
swivel adapter to the wall.
5. Screw the add−on component 4 to the threaded bolts of the swivel
adapter 3.
4 spacer bolts 5 on the inside/outside M5 x 20 mm
–
6. Stick the second self−adhesive seal 1 on the add−on component 4.
7. Screw the mounting frame 6 to the add−on component 4.
4 nuts M5 with washers Æ 5.3 mm
–
4 screws M5 x 8 mm with washers Æ 5.3 mm
–
Now you can connect the Command Station (¶ 35).
34
‚
1
0
2
…
3
‡
4
4
1
ƒ
2
3
4
5
3
6
l
CS57x0−011
MA_CSx8xx DE/EN/FR/ES/IT 2.0