Product Overview; Opening Your Safe For The First Time - First Alert 1037293 Manual Del Usario

Product Overview

PRODUCT OVERVIEW
5
Locking Bolts
1
Battery Compartment
2
Reset Button
3
Interior Light
4
3 Convenient Charging Cord Holes
5
6
7
LED Indicator Image
6
– Yellow Smiley Face appears when code is entered
– Green Ok appears when safe is unlocked
Handle (Knob)
7
Emergency Lock Cover
8
Control Panel
9
" * " & "#" Enter Buttons
10
3
3
2 1
4
8
9
10

OPENING YOUR SAFE FOR THE FIRST TIME

Upon first opening, users should open the safe with the emergency key.
Remove emergency lock cover, then insert the emergency key, and turn it
1
counter clockwise.
Turn the handle(knob) clockwise to open the door.
2
CAUTION
Finish operation, pull out the emergency key and keep it in a safe place.
INSERTING THE BATTERIES
Open the door.
1
Insert 4 non-rechargeable, Alkaline AA batteries into the battery
2
compartment.
Under normal condition, if both red and the green lights are on at the same
3
time, it means the voltage is low and you should insert new batteries.
CAUTION
Replace 4 fresh non-rechargeable, Alkaline AA batteries batteries by lining them
up in a manner as indicated by the "+ " and " - " signs. If the batteries die, the user
and master code is lost. Use the keys and the user preset code to open the safe.
OPENING DOOR
CAUTION
The user preset code is "159" and then press pound #. Please input the user code
again if the yellow light flashes with three buzzer beeps.
Input your user's code (3 to 8 digits), each press results in
1
one buzzer beep and yellow light flashes.
Press " * " or "#" button, the green light will be on.
2
Rotate the handle(knob) clockwise and pull outwards within
3
5 seconds, the door is opened.
NOTE: An interior LED turns on for 30 seconds after the door is opened.
Opening Your Safe for the First Time
4