Cycle Setting Buttons; Cycle Option Buttons - LG STEAM DRYERS DLEX2501W Guía Del Usuario E Instrucciones De Instalacion

CYCLE SETTING BUTTONS

SENSOR DRY cycles have preset settings
that are selected automatically and cannot be
changed. MANUAL DRY cycles have default
settings, but you may also customize the settings
using the cycle setting buttons. Press the button
for that option to view and select other settings.
DRY LEvEL
• T his option is only available with SENSOR DRY
cycles.
• The dryer will automatically adjust the cycle
time. Selecting VERY DRY or MORE DRY will
increase the cycle time, while LESS DRY or
DAMP DRY will decrease the cycle time.
• Use a LESS DRY or DAMP DRY setting for
items that you wish to iron.

CYCLE OPTION BUTTONS

Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
1 Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2 Use the cycle setting buttons to adjust the
settings for that cycle.
3 Press the cycle option button(s) for the
option you would like to add. A confirmation
message will be shown in the display.
4 Press the START/PAUSE button to start the
cycle. The dryer will start automatically.
30
Selects the level of dryness for
the cycle. Press the DRY LEVEL
button repeatedly to scroll
through available settings.
NOTE: To protect your garments, not every
dryness level, temperature, or option is available
with every cycle. See the Cycle Guide for details.
TEMP. CONTROL
Adjusts the temperature setting
from ULTRA LOW to hIGh.
This allows precise care of your
fabric and garments. Press the
TEMP. CONTROL button repeatedly to scroll
through available settings.
TIME DRY
Allows you to manually select
the drying time, from 20 to
60 minutes, in 10- minute
increments. Use this for small
loads or to remove wrinkles. Use the MORE
TIME/LESS TIME buttons to add or reduce the
drying time in 1-minute increments.
WRINKLE CARE
Selecting this option will tumble
the load periodically for up to 3
hours after the selected cycle,
or until the door is opened. This
is helpful in preventing wrinkles when you are
unable to immediately remove items from the
dryer.
BEEPER ON/OFF
Adjusts the volume of the end-
of-cycle beeper, or turns off the
beeper.