Maintenance
For Smart Use of The Air Conditioner
6
Setting of proper room
temperature
Proper
temperature
Close doors and windows
during operation
During cooling operation
prevent the penetration
of direct sunlight with
curtain or blind
If the unit is not to be used
for a long time, turn off the
power supply main switch.
OFF
Remote Controller
Do not usewater,wipe the controller
with a dry cloth.Do not use glass
cleaner or chemical cloth.
Do not use the following for cleaning
Gasoline,benzine, thinner or cleanser
ay damage the coating of the unit.
m
Air Filter cleaning
Open the inlet grille by pulling it upward.
Remove the filter.
Push up the filter's center tab slightly until it is
released
from the stopper, and remove the filter downward.
Clean the filter.
Use a vacuum cleaner to remove dust, or wash the filter with
water.After washing, dry the filter completely in the shade.
Attach the filter.
Attach the filter correctly so that the "FRONT" indication
is
facing to the front.Make sure that the filter is
completely
fixed behind the stopper.If the right
and left filters are not
attached correctly, that
may cause defects.
Close the inlet grille.
Do not block the air inlet
or outlet
Use the timer effectively
Use the louvers effectively
Indoor Body
wipe the air conditioner by using a
soft and dry cloth.For serious stains,
use a neutral detergent diluted with
water.Wring the water out of the
cloth before wiping,then wipe off the
detergent completely.
O
Hot water over 40
O
C(104
F) may
cause
discoloring or deformation.
Once every
two weeks