Publicidad
English
8
GENERAL CONSIDERATIONS
- For your column to function correctly, the
water supply pressure must not be higher
than 5 bar or lower than 2 bar. For safety
reasons, however, it must not exceed 55ºC.
Always respect these limits. If the pressure or
temperature of the water is higher, the column
could be damaged. On the other hand, if the
pressure of the water is lower, your column
may not function correctly.
- T h e t h e r m o s t a t i c t a p r e g u l a t e s t h e
temperature by activating the thermostatic
cartridge. If the boiler switches off too often
and cold water comes out when using any of
the functions of the column, clean the filters of
the thermostatic taps and, if the problem
persists, reduce the temperature of hot water
coming from the boiler or heater with the
appropriate control on the device.
cases, consult the technical characteristics of
the boiler.
HYDROMASSAGE
Pressure of the water jet: Regulate the
water flow for a more or less powerful
massage.
Combinations of the type and
duration of massage and the temperature of
t h e w a t e r e n a b l e y o u t o a d a p t t h e
hydromassage to your requirements.
In general, the intensity of the water jet has
the following effects:
-Greater intensity: toning effects
-Less intensity: relaxing effects
T h e h y d r o m a s s a g e s h o u l d n e v e r b e
excessively strong.
Temperature of the water: We recommend
that this be between 30 ºC and 39 ºC:
Hydromassage:
-Cold (30 - 35ºC). With mainly toning effects.
NUI max
In all
-Neutral (36 - 37ºC). For relaxing effects.
-Hot (38 - 39ºC). For muscular applications.
Thermostatic tap: You can select the desired
temperature by means of the "temperature
indicator control". Turn the on-off control until
you reach the desired water flow rate. The water
will be at the temperature you have selected.
On the "temperature indicator control", there is a
safety button that prevents temperatures over
38ºC being selected by mistake. If you want a
higher temperature, press the button to unblock
this safety mechanism.
Hydromassage process:
Select the desired function using the function
selector, which permits the following options:
•Spray massage
general use
•Massage with the hand-shower. For use
on any part of the body.
•Body massage with the upper adjustable-
direction vertical jets. For application over
a wide area of theupper body.
•Body massage with the lower adjustable-
direction vertical jets. For application over
a wide area of the lower body.
•Foot-level water outlet.To check the
temperature.
Turn the jets in the most appropriate direction,
though you can later change it to direct the water
jets onto whatever parts of the body you want.
•Adjust the temperature of the water, checking it
at the foot-level outlet.
•Select the appropriate function.
•Turn the water on progressively until you obtain
the most appropriate hydromassage pressure.
(fixed shower). For
Publicidad
