Metra 99-7802CH Instrucciones De Instalación página 3

Kit Preparation
To the radio housing:
1. Attach the (6) factory panel clips.
(Figure A)
2. Attach the factory hazard button
using the factory screws. (Figure B)
Continue to Kit Assembly
99-7802CH
(Figure A)
(Figure B)
®
Kit Assembly
ISO DIN radio provision with pocket
1. Secure the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied.
(Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio between the radio
brackets and secure using the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Secure the radio into the dash and
reassemble the dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)