Zibro D112 Instrucciones De Uso página 36

Ocultar thumbs Ver también para D112:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
WHAT YOU MUST KNOW IN ADVANCE
GENERAL
To obtain optimum performance from your dehumidifier, do not place it near a
radiator or any other heat source.
Ensure that all windows are closed in order to achieve maximum efficiency.
The capacity of the dehumidifier depends on the temperature and the humidity in
the room. At lower temperatures, less moisture will be removed.
Ensure that the air filter is kept clean. This prevents unnecessary power consumption
and guarantees optimum efficiency.
If the power supply has been interrupted, the defumidifier will restart after three
minutes. The automatic delay protects the compressor.
SAFETY REGULATIONS
Do not connect the device with an extension cord.
Never use the device with a damaged cord or plug.
The device must be connected to the power supply with an earthed plug. Ensure that
the powercord is not entangled or rolled up.
Always switch the device off before pulling the plug out from the wall outlet. When
you pull out the plug from the socket, grip the plug to avoid damaging the cord.
It is forbidden for children to play with the device. The device may only be used by
adults.
It is dangerous and forbidden to modify the device.
It is forbidden to cover the device or to insert foreign objects into the device as a fire
or electric shock could occur.
Do not make the device wet.
Avoid the use of spray cans (insect spray, hair spray, etc.) in the vicinity of the
dehumidifier. This may damage the device and/or cause fire.
TIPS FOR SAFE USAGE
Keep plastic bags and other packaging materials out of reach of children.
The device was developed to dehumidify rooms. This means that it may not be used
for other purposes.
Always contact your supplier if repair or maintenance is required.
Do not place the device in the vicinity of heat sources, materials, installations, or near
curtains, that may cause a fire hazard or in environments where explosions may occur.
Always switch the device off and remove the plug from the socket before cleaning it.
The device must always be in the upright position, also during storage and
transportation. If the device is not transported correctly, first place the device upright
for 24 hours before switching it on.
Empty the water container before transporting the device.
Place the unit at least 20 cm away from the wall or other objects. Keep a distance of
50 cm between clothing and the unit, and ensure no moisture will drip into the
device.
The floor must be stable and level. This will prevent vibrations, noise, and leakage.
4
36

Publicidad

Tabla de contenido
loading

Productos relacionados para Zibro D112

Este manual también es adecuado para:

D114

Tabla de contenido