KlipXtreme KPM-580W Manual De Instalación página 5

Step 5
M6 x 10mm Screws
Step 1
Step 3
Step 5
Step 2
Step 4
Concrete ceiling installation
Introduction
You can install the projector mount to any concrete surface with a minimum 6˝ thickness. For
concrete installation, use concrete wedge anchors (¼˝ recommended) to secure the mounting
hardware, and a masonry drill bit to drill the pilot holes. Wedge anchors and masonry drill bits are
not supplied, but you can purchase them at your local hardware store.
Example wedge anchors and masonry bit
Step 1
Place the Ceiling Plate into position against the ceiling.
Using the ceiling plate as a template, mark off four (4) mounting holes to be used for securing the
mount, and place the ceiling plate aside.
Follow the direction of the arrow for positioning the projector screen relative the projector mount.
Not included
Step 1