Publicidad
Idiomas disponibles
Idiomas disponibles
MS 4570
DESCRIPTION
INSTRUCTIONS FOR USE
ASSEMBLING
- Step 1: Assemble Blade Assembly by Blade Attachment, then anticlockwise turn Blade Assembly till it is
tight. See Fig 1.
- Step 2: Turn adjusting knob to adjust the space between Slice Thickness Gauge and Blade. Press down by
slight force while turning Adjusting knob. Turn Adjusting knob toward "+", the thickness will increase. Turn
Adjusting knob toward "-", the thickness will reduce. The minimum thickness is 1 mm, the maximum
thickness is 15MM. See Fig 2.
- Step 3: Put plug in outlet correctly, set gear which you want, press switch on, then the appliance start to
work. See Fig 3
- Step 4: Put food on Food Tray, then push food by Food Pusher, at same time push Food Tray hardly toward
arrowhead (Food Tray must back-and-forth move). Notice: Must use Food Pusher to push food, don't push
food by hand, This appliance must be used with the sliding feed table and the piece holder in position unless
this is not possible due to the size or shape of the food. See Fig 4.
Range of Food which can be cut: Frozen meat without bone (example beef, mutton etc.), cooked food
(example bread, cheese, sausage etc.), hard vegetable without stem (example carrot, white radish, cucumber
etc.).
Tip: Cut sausage and cheese first and bread last. The appliance is then easier to clean.
- Step 5: After using, turn switch off, pull plug out from outlet. Toward arrowhead remove blade by Blade
Attachment (see Fig 5), and Turn knob to adjust Slice Thickness Gauge to 0. See Fig. 5
9
Publicidad
