Additional Functions - IMG STAGELINE ODP-361RGB Manual De Instrucciones

10-channel operation
DMX- DMX-
channel value
1 000 – 255
basic brightness of the red LEDs
2 000 – 255
time of scene when channel 7 = DMX value > 109
basic brightness of the green LEDs
3 000 – 255
fading time when channel 7 = DMX value > 109
4 000 – 255 basic brightness of the blue LEDs
000 – 010
011 – 020
021 – 030
031 – 040
041 – 050
051 – 060
061 – 070
071 – 080
081 – 090
091 – 100
101 – 110
111 – 120
121 – 130
131 – 140
141 – 150
blue © red © green © blue ...
151 – 160
5
cyan © yellow © purple © cyan ...
161 – 170
red © green © blue © red ...
171 – 180
cyan © green © yellow © red © purple © blue © cyan ...
181 – 190
191 – 200
201 – 205
WT01 (shade of white 1,
206 – 210
211 – 215
216 – 220
221 – 225
226 – 230
231 – 235
236 – 240
241 – 245
246 – 250
251 – 255
000 – 255 speed when channel 5 = DMX value > 10
6 000 – 015
016 – 255
000 – 009
010 – 019
show programme AT.01 (
020 – 029
030 – 039
040 – 049
050 – 059
060 – 069
070 – 079
080 – 089
090 – 099
100 – 109
7
110 – 119
sequence of scenes PR.01 (
120 – 129 sequence of scenes PR.02
130 – 139 sequence of scenes PR.03
140 – 149 sequence of scenes PR.04
150 – 159 sequence of scenes PR.05
160 – 169 sequence of scenes PR.06
170 – 179 sequence of scenes PR.07
180 – 189 sequence of scenes PR.08
190 – 199 sequence of scenes PR.09
200 – 255 sequence of scenes PR.10
8 000 – 255
000 – 049 immediate response of the LEDs
050 – 099
slightly slow response (
9 100 – 149
150 – 199
200 – 255 response as slow as possible
10 000 – 255
subaddresses ,
Fig. 9
Function
dimmer
no function
red © yellow
yellow © green
green © cyan
cyan © blue
blue © white
white © green
green © white
white © red
↔
green red
↔
blue red
↔
blue green
↔
blue yellow
↔
cyan red
↔
green purple
white, max. brightness
chapter 6.1.2)
WT02
WT03
WT04
WT05
WT06
WT07
WT08
WT09
WT10
WT11
no stroboscope
stroboscope 1 – 20 Hz
no function
fig. 3)
show programme AT.02
show programme AT.03
show programme AT.04
show programme AT.05
show programme AT.06
show programme AT.07
show programme AT.08
show programme AT.09
show programme AT.10
chapter 6.1.4)
speed for AT.01 – AT.10
chapter 7.3)
slow response 2
slow response 3
fig. 10
Selecting spotlights
with a subaddress
via the DMX channel 10
DMX- Sub- DMX- Sub-
value address value address
000 – 009 all
010 – 019 01 223 34
020 – 029 02 224 35
030 – 039 03 225 36
040 – 049 04 226 37
050 – 059 05 227 38
060 – 069 06 228 39
070 – 079 07 229 40
080 – 089 08 230 41
090 – 099 09 231 42
100 – 109 10 232 43
110 – 119 11 233 44
120 – 129 12 234 45
130 – 139 13 235 46
140 – 149 14 236 47
150 – 159 15 237 48
160 – 169 16 238 49
170 – 179 17 239 50
180 – 189 18 240 51
190 – 199 19 241 52
200 – 209 20 242 53
210 21 243 54
211 22 244 55
212 23 245 56
213 24 246 57
214 25 247 58
215 26 248 59
216 27 249 60
217 28 250 61
218 29 251 62
219 30 252 63
220 31 253 64
221 32 254 65
222 33 255 66
Fig. 10

7 Additional Functions

7.1 Key lock
A key lock may be activated as a protection
against unauthorized change of adjustments.
With activated lock, adjustments can only be
made after the input of a special key sequence.
1) Press the button MENU so many times until
the highest menu level is reached (in fig. 2 on
the very left).
2) Press the button UP or DOWN so many times
until the display shows .
3) Press the button ENTER. The display shows
(key lock off).
4) Use the button UP or DOWN to switch to
The key lock is activated.
5) To make adjustments now, press the follow-
ing buttons successively:
If the display does not light up, press any but-
ton first, then
ENTER, UP, DOWN, UP, DOWN, ENTER.
Pressing the buttons UP and DOWN is
shown in each case by an asterisk ( ) on the
display. After finally pressing the button
ENTER, the display shows the last menu
item selected. As long as the display lights
up, adjustments can be made. If it extin-
guishes, the key lock is activated again.
7.2 White balance
For the colour white the spotlight has been fac-
tory-set so that all LEDs light up at maximum
© ©
brightness (
the colour white another colour temperature may
be adjusted (e. g. a warm white or a cold white).
1) Press the button MENU so many times until
the highest menu level is reached (in fig. 2 on
the very left).
2) Press the button UP or DOWN so many times
until the display shows
3) Press the button ENTER. The display now
shows .
4) Press the button ENTER again. The display
now shows , or and a number between
000 and 255.
= brightness of the red LEDs
= brightness of the green LEDs
= brightness of the blue LEDs
5) Use the button ENTER to select the three
adjusting functions successively and the but-
ton UP or DOWN to adjust the brightness in
each case so that the desired colour temper-
ature will result.
6) Activate the adjusted colour temperature:
a) Press the button MENU so many times
until the display shows
b) Press the button DOWN twice so that the
display shows .
c) Press the button ENTER. The display
shows the indication
or .
d) If is not shown, press the button UP
or DOWN as many times as necessary.
e) Press the button ENTER. If the display
shows , the adjusted colour tempera-
ture is activated, if it shows
with the button UP or DOWN.
7) To be able to control the spotlight by DMX, go
from the menu branch to the menu item
:
a) Press the button MENU so many times
until the display shows
b) Press the button UP or DOWN so many
times until the display shows
GB
.
). However, for
.
again.
, , ,
, switch to
again.
.
13