LG 49LJ5400 Guía Rápida De Configuración página 19

Television System
For LJ5400-S* series NTSC, PAL-M/N, SBTVD
NTSC, PAL-M/N, DVB-T,
For LJ540T-D* series
DVB-T2
Program Coverage
VHF 2-13, UHF 14-69,
For LJ5400-S* series
DTV 2-69, CATV 1-135
VHF 2-13, UHF 14-69,
For LJ540T-D* series
DTV 2-69, CATV 1-125
External Antenna Impedance
75 Ω
Environment condition
• Operating Temperature
0 °C to 40 °C
• Operating Humidity
Less than 80 %
• Storage Temperature
-20 °C to 60 °C
• Storage Humidity
Less than 85 %
Wireless Module (LGSWFAC71)
Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz
• As band channels can vary per country, the
user cannot change or adjust the operating
frequency. This product is configured for the
regional frequency table.
• For consideration of the user, this device
should be installed and operated with a
minimum distance of 20 cm between the
device and the body.
• FCC ID: BEJLGSWFAC71 / IC: 2703H-LGSWFAC71
Output Power (Max.)
15 dBm
14.5 dBm
14.5 dBm
Regulatory
WARNING!
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the
television set.
• Ensuring the television set is not overhanging
the edge of the supporting furniture.
• Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
• Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
Symbols
Refers to alternating current (AC).
Refers to direct current (DC).
Refers to class II equipment.
Refers to stand-by.
Refers to "ON" (power).
Refers to dangerous voltage.
11