Never immerse the charging base in
•
water or any other liquid.
After cleaning the toothbrush and
•
before charging it, make sure the
charging base is completely dry.
Check that the supply voltage on the
•
charging base data plate is compatible
with your electrical installation.
Do
not
use
•
than those recommended by the
manufacturer.
Use only the charging base supplied
•
with the appliance. Do not use the
charging base for other purposes.
Keep the appliance and charging
•
base away from hot surfaces.
Never use this appliance if the power
•
cord or charging base are damaged,
if the appliance does not work
properly, if it has been dropped, if it
is damaged or has been immersed
18
V.1.0
instructions for use
accessories
other
in water. Please take it to a customer
service department centre, where it
will be inspected and repaired.
Make sure the power cord cannot be
•
crushed or trapped, especially around
the adapter, power outlet and where
it is connected to the appliance.
Never unplug the charging base by
•
pulling on the power cord.
Always unwind the power cord
•
completely when in use (to prevent it
from overheating).
Do not wrap the power cord around
•
the charging base when storing it.
The power cable cannot be replaced.
•
If the cable is damaged, the appliance
should be discarded.
Always switch off the appliance (using
•
the on/off button) when changing the
brush heads and before cleaning.
19
V.1.0
instructions for use