Westinghouse LTB20 Manual De Usuario página 13

CARE AND MAINTENANCE
REWINDING SPOOL FROM BULK LINE
It is not recommended to hand rewind spool from bulk line as this leads to issues with the trimmer
if it is not spooled correctly. You can purchase pre-wound spools for this model from Westinghouse
dealers.
MAINTENANCE
• To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be
performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
• Keep the air intake slots clean to avoid overheating.
• Your trimmer line can dry out over time. To keep your line in top condition, store spare pre-wound
spools or bulk line in a plastic, sealable bag with a tablespoon of water.
• Plastic parts may be cleaned by using a mild soap and a damp rag.
• The line cutter on the edge of the guard can dull over time. It is recommended you periodically
touch-up the sharpness of the blade with a file.
AUTOMATIC LINE FEED DOES NOT WORK
• Remove battery from tool.
• Remove the spool cap.
• Pull the cutting line until it protrudes approximately 5-3/8 inches (136mm) from the spool. If
insufficient cutting line is left on the spool, install a new spool of cutting line.
• Ensure that the line is not crisscrossed on the spool. If it is, unwind the cutting line, then wind it
back on the spool neatly so that the lines do not cross.
• Ensure the beginning of the cutting line is pulled tight against the spool.
• Align the tabs on the spool cap with the cut outs in the housing.
• Push the spool cap onto the housing until it snaps securely into place.
• If the cutting line protrudes beyond the trimming blade, cut it off so that it just reaches the blade.
• If the automatic line feed still does not work or the spool is jammed, try the following suggestions:
• Carefully clean the spool and housing.
• Remove the spool and check if the lever in the spool housing can move freely.
• Remove the spool and unwind the cutting line, then wind it on neatly again. Replace the spool
into the housing
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To preserve natural resources, please recycle or dispose of batteries properly.
This product contains lithium-ion batteries. Local, state or federal laws may
prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local
waste authority for information regarding available recycling and/or disposal
options.
WARNING: Upon removal, cover the battery pack's terminals with heavy-
duty adhesive tape. Do not attempt to destroy or disassemble battery pack
or remove any of its components. Lithium-ion batteries must be recycled or
disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short
circuit may result. Keep away from children. Failure to comply with these warnings could result in fire
and/or serious injury.
13