12. Install the
secondary M.2
13. Install the
SSD
door.
14. Install the
SD
card.
15. Follow the procedure in
Reposamanos
Removing the palmrest
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
SSD
door.
4. Remove the
secondary M.2
5. Remove the
base
cover.
6. Remove the battery.
7. Remove the
primary M.2
8. Remove the
SIM
card.
9. Remove the
secondary
10. Remove the
WWAN
card.
11. Remove the
WLAN
card.
12. Remove the
keyboard
lattice.
13. Remove the keyboard.
14. Remove the
primary
memory.
15. Remove the
power adapter
16. Remove the
power button
17. Remove the
smart card
18. Remove the
touchpad
buttons.
19. Remove the
SD card
reader.
20. Remove the
power
button. or
21. Remove the
heat-sink
assembly.
22. Remove the
inner
frame.
23. Remove the
GPU power
24. Remove the
GPU
card.
25. Remove the
system
board.
26. Remove the speaker.
27. Remove the
middle
cap.
28. Remove the
display
assembly.
About this task
The picture below shows the palmrest after performing the pre-removal parts procedures for any palm rest replacement
78
Desmontaje y reensamblaje
SSD.
after working inside your
computer.
before working inside your
SSD.
SSD.
memory.
port.
board.
reader.
power button assembly with fingerprint reader
cable.
computer.