Handling; Dry Shave; Wet Shave - Easy Home 9113973 Manual Del Usuario

USA

Handling

Handling

Dry shave

NOTICE!
We recommend a dry shave before you wash. After washing, you
skin is slightly swollen. As a result, shavers are often unable to
reach the entire length of your beard hair so the shave will be less
thorough.
For a dry shave, follow the steps below:
1. Take the protective cap
2. Use the On/Off switch
3. Use your free hand to stretch the part of your face you intend to shave.
4. Apply gentle pressure to move the shaver head
direction of hair growth.
5. After a few strokes, use your free hand to check the results and repeat step
4 if necessary.
6. Shave as described in steps 2 – 4.
7. If necessary, use the trimmer
trimmer" (see fig. D).
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter "Daily cleaning after a dry
shave".

Wet shave

1. Dampen your face and apply shaving cream or gel to your face.
2. Take the protective cap ctive cap ctive cap
3. Use the On/Off switch ff switch ff switch
4. While applying gentle pressure, move the shaver head gen gen
the direction of hair growth.
5. After a few strokes, use your free hand to check the results and repeat
step 4 if necessary.
6. Shave as described in steps 2 – 4.
7. If necessary, use the trimmer as described in the chapter "Using the
trimmer".
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter "Daily cleaning after a wet
shave".
14
USA
+1 877 386 8264
1
off of the shaver (see fig. A).
5
to turn the shaver on.
14
as described in the chapter "Using the s described in the
u have finishe u have finished sh
bed in the ch bed in the chapte
e and apply e and apply
1 1
off of the shaver (see fig. A).
5
to turn the shaver on.
u intend to s end to s
2
perpendicu perpendicular perpendicular to the
eck the results and the results
escribed in the
2
AFTER SALES SUPPORT
TM3Service@outlook.com
perpendicular to