LG CRD-8161B Manual De Instrucciones página 12

Interface
connector
IDE Cable
Figure 9. Connecting the IDE Cable
to the Interface Connector
CONNECTING AN AUDIO CABLE
Pin assignment
The pin assignment of the
audio output connector is
as follows.
GND GND
R-Channel
L-Channe
* Pin assignment of the audio cable
GND
L-Channel
Figure 10. Connecting an Audio Cable
to the Audio Output Connector
Inserting and Removing a CD Disc.
Insert CD label side up
Note : Use only standard 12cm discs.
Pin 1
Red-edge
l
Audio
to Audio
Cable
Equipment
(sound card)
GND
R-Channel
E-12
Step 6. Connect the 40-pin IDE Cable to
the back of the CD-ROM Drive.
Please make sure that the red
edge of the IDE Cable is
connected to Pin 1 on the CD-
ROM Drive.
If you want to connect audio equipment or
a sound card to the CD-ROM drive, use
an audio cable to connect the drive to the
sound device.
To insert a CD disc in your CD-ROM
drive, power on your system and:
1. Push a CD disc into the slot with the label
side facing up.
2. Press STOP/EJECT button to eject CD
disc from slot.
• Do not touch the unlabeled side of the
disc.