Crown CT15233P Manual Original página 26

Safety guidelines during power tool op-
eration
Before commencing operation
• Saw blades must be used in accordance with manu-
facturers' recommendations� Do not use saw blades
which fail to meet the technical requirements con-
tained in this manual�
• The saw blade arrow must always point in the same
direction as the guard cover arrow�
• Use sharp and undamaged saw blades only�
Cracked, dented or dull saw blades have to be re-
placed�
• Do not use saw blades with dimensions (outside and
mounting diameter) different from recommended�
• Do not use saw blades made of high-speed steel�
• Never use other types of cutting blades (abrasive,
diamond, etc�) for this power tool�
• Ensure that all devices preventing accidental touch-
ing of the saw blade are properly mounted, functional
and in perfect order�
• Never work with protection devices dismounted�
Damaged protection devices must be replaced imme-
diately�
• During operation never fix (bind, wedge, etc.) the
sliding guard cover open�
• Avoid blocking of the sliding guard cover or its clogging
with sawdust If this is the case switch off the power tool,
fix the malfunction and only then continue operation.
• Do not use the power tool with a damaged insert�
• Remove all nails or any other metal objects from
blanks before cutting�
During operation
• Never stand on the power tool - if it turns over or if
you accidentally touch the saw blade, you can be seri-
ously injured�
Keep your hands at a safe distance from
the saw blade. Dangerous areas are
marked with a special sign.
• During operation watch the position of a power cable
(it should always be positioned behind the tool)� Do not
allow it to whip around your legs or arms�
• It is necessary to observe the applicable rules while
cutting with traversing�
• While cutting grooves, it is necessary to keep an eye
on the saw blade - it can get stuck in the material being
machined�
• Never treat workpieces containing asbestos�
• Do not use the power tool to cut firewood.
• Avoid stopping the power tool motor when under
load�
• Avoid overheating your power tool, when using it for
a long time�
• If your power tool is equipped with a kerf indicat-
ing laser, observe the necessary safety measures�
Never look at the beam or point it at other people or
animals - if the la ser beam strikes the eyes, it can
damage the eyesight�
After finishing operation
• The power tool can be removed from the workplace
only after the saw blade has been switched off and
stopped completely�
• Never try to slow down the inertial rotation of the
saw blade with the spindle lock or by applying effort
to the saw blade lateral surface� If you use the spindle
lock for this purpose, the power tool will fail and your
warranty will be cancelled�
• The saw blades can get very hot during operation -
do not touch them until they have cooled down�
Symbols used in the manual
Following symbols are used in the operation
manual, please remember their meanings� Correct
interpretation of the symbols will allow correct and safe
use of the power tool�
Symbol
English
26
Meaning
Slide mitre saw
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�