3. Identification
3.1. Product mark and model designation
Log cabins in Nordic spruce with 28 mm wall thicknesses
General
All wood parts in Nordic spruce
Floor
Substructure of pressure-treated floor beams
19 mm thick tongue and groove floorboards
Wall assembly
28 mm thick tongue and groove logs
Door
Solid door with Safety clasps with eyelet
Roof
19 mm thick roof boards nailed to study roof purlins
3.2. Name and address of the manufacturer
Manufacturer:
weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel.
Fax
E-mail info@weka-Holzbau.com
4. Product description
4.1. General functions and area of application
The cabins are intended exclusively for the storage of garden equipment etc. or as a place to relax for a
short while and enjoy your garden. You are not permitted to use the cabin as a residence or heated
accommodation.
4.2. Dimensions
You can find the dimensions on the views included in the pack.
4.3. Safety information
Selection of the substrate
The ground under the cabin should be level, horizontal and built up. If your cabin is located near slopes and
basements, you should consult a local builder. Otherwise, there may be a risk of collapse.
Built-up ground must be compressed to ensure that the cabin does not sink, otherwise damage may occur.
Any turf must also be removed.
Space requirements
The space required depends on the size of your cabin. The cabin must always be accessible from the
outside on all sides to allow for inspection, ventilation and protection against weathering. The space required
should be approximately 1.0 – 1.5 m larger than your cabin on all sides.
Safety information and warnings
In order to prevent accidents, we recommend that children be kept out of the direct vicinity during assembly.
During assembly, children under the age of 14 should be kept at least 3 m from the assembly site.
Techn. Änderungen vorbehalten!
: (0049)-395 429080
: (0049)-395 4290883
10
Copyright HRB 3662