Esataii Connector (Esataii_Top) - ASROCK ConRoe1333-eSATA2 Manual De Instrucciones

Connect the SATA
data cable to the red
SATAII connector
(SATAII_RED (PORT2))
2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED (PORT2); see p.2 No.21) and
the red eSATAII connector (eSATAII_BOTTOM; see p.2 No.36) with a SATA
data cable first, and then connect the orange SATAII connector
(SATAII_ORANGE (PORT3); see p.2 No.15) and the orange eSATAII connec-
tor (eSATAII_TOP; see p.2 No.37) with another SATA data cable. After that,
both the top and the bottom eSATAII ports of the I/O shield are enabled.
Connect the SATA
data cables to both
red SATAII connector
(SATAII_RED (PORT2))
and orange SATAII
connector (SATAII_
ORANGE (PORT3))
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
ASRock ConRoe1333-eSATA2 Motherboard
Connect the SATA
data cable to the red
eSATAII connector
(eSATAII_BOTTOM)
Connect the SATA
data cables to both
red eSATAII connector
(eSATAII_BOTTOM)
and orange eSATAII
connector (eSATAII_TOP)
2 7 2 7 2 7
2 7 2 7