LF Holiday living M16-300-NM7 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
1. Take the head and neck (A) from inside the body (B).
Place the parts flat on the floor.
Insert the three metal rods at the top of each leg
(C) into the corresponding holes on the body (B).
2. Insert the metal hook at the lower part of the left
front leg into the corresponding nut on the right
front leg to secure them in position.
Repeat this step for the left and right hind legs.
Attach the head and neck (A) to the body
(B) using the hooks at the base of the neck
and head (A).
3. Fasten the base of the head and neck (A) to
the body (B) using the plastic ties (AA).
Insert the metal rod of the tail (D) into the
hole at the rear end of the body (B).
Secure the figure into the ground using the
ground stakes (BB).
Plug into a properly grounded receptacle.
Hardware Used
Plastic tie
Ground stake
x 2
x4
5
5
1
2
3