Design And Function; Complete Overview - CASO DESIGN VC9 Manual De Instrucciones

15 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.
15.1

Complete overview

6 Lower gasket: Seals the vacuum chamber from below
7 Upper gasket: Seals the vacuum chamber from above
8 Sealing bar:
seal but not to stick to the strip. Place the bag to be sealed over this sealing element.
Warning
Please observe the following safety notices in order not to burn or scald yourself or others.
► To avoid getting burned, never touch the sealing bar while the unit is operating.
caso Vakuumierer VC9
Contains a heating wire covered with Teflon which allows the bag to
1 Safety switch: Is
activated when the cover is
closed.
2 Release button: Press
both sides simultaneously to
open the cover. And release
the vacuum pressure inside
the machine.
3 Air Intake: Connects the
vacuum chamber to the
pump.
4 Sealing profile Presses
the bag tightly onto the
sealing element.
5 Vacuum chamber:
Position the open end of the
bag inside the chamber,
draws air out of bag and
catches any liquid overflow
from the bag.
36