WARNING
It is important that all end-devices to be charged with the USB
QC3.0 charger are suitable for the QC3.0 protocol.
Ensure that your end-device (smartphone, tablet, notebook,
console or other applications) is suitable for one of the output
voltages 5V/9V/12V.
CARE
Disconnect the device from the mains before cleaning or before
storing for an extended period of time.
Clean the charger only with a dry, soft cloth.
TECHNICAL DATA
1. Input:
2. Output:
3. Max. output power:
4. Max. outside temperature: -10°C...35°C
ENVIRONMENTAL INFORMATION
The device should not be discarded in the normal household waste
under any circumstances. Dispose of the device via an authorised
disposal centre or your communal waste disposal facility. Observe the
current applicable regulations. Contact your waste disposal facility
in the event of any doubt. Dispose of all packaging materials via an
environmentally friendly disposal facility.
LIMITATION OF LIABILITY
The information contained within these operating instructions can be
changed without prior notification. ANSMANN accepts no liability for
direct, indirect, incidental or other damage or consequential damage
arising through improper handling or through disregard of the informa-
tion contained within these operating instructions.
GUARANTEE
The device has a three-year guarantee. The guarantee does not apply
to damage to the device arising through a failure to comply with the
operating instructions. You can find our warranty terms online at www.
ansmann.de
Subject to technical changes. We assume no liability for printing errors. 08/2019
AC110-240V | 50-60Hz | max. 800mA
USB (QC3.0):
18W (QC3.0)
5V/3A
9V/2A
12V/1.5A