Hoover FM216LI011 Manual De Instrucciones página 8

USINg yOUR ClEANER
Main Cleaner
Turn the cleaner on by sliding the On/Off switch [e] to the required settings: [4]
• HARD FLOOR: First position of On/Off switch, the agitator and nozzle LED lights are OFF.
• CARPET: second position of On/Off switch, the agitator and nozzle LED lights are ON.
Handheld Cleaner
1. Push the handheld release button upward, lift the handheld unit from the main body. [5]
2. Turn the handheld cleaner on by sliding the On/Off switch [K] forward.
Charging/Power Indication*
This cleaner is equipped with a LED display. When the product is working, the display will show the
following:
BATTERY LEVEL INDICATOR:
• 3 points = Fully Charged
DISCHARGE INDICATOR: When the batteries are fully discharged, the indicator will flash for around 20
seconds before cleaner switches off automatically.
Crevice Tool / Dusting Brush
The accessory is stored at the rear of the main body. It fits directly onto the handheld unit.
IMPORTANT: During storage and charging, secure your appliance handle into the product holder. [6]
ClEANER MAINTENANCE
Emptying the Dust Container
1. Push the handheld unit release button upwards, lift the handheld unit from main body.
2. Press the dust container release button and remove the dust container. [7]
3. Lift the filter from the dust container. Turn the mesh filter to the anticlockwise direction to pull it out
from the cloth filter. [8]
4. Turn the dust container upside down over a bin to instantly empty it. [9]
5. Reassemble the handheld unit and return to the cleaner main body.
Cleaning the Filter
1. Push the handheld release button upwards, lift the handheld unit from cleaner main body.
2. Press the dust container release button and remove the dust container.
3. Remove the filter from the dust container and clean.
4. Wash the cloth filter and mesh filter in lukewarm water and leave to dry for 24 hours. Once thoroughly
dry return to the dust container. [10, 11]
5. If required, wash the dust container in lukewarm water. Ensure it is fully dry before returning to the
main body of the cleaner.
6. Reassemble the handheld unit and return to the cleaner main body. [12,13]
Note: Do not use hot water or detergents when cleaning the filters. In the unlikely event of the filters
becoming damaged, fit a genuine Hoover replacement. Do not try use the product without a filter fitted.
IMPORTANT: For optimum performance, always keep your filter clean. We recommend that the filter
should be washed at least once a month.
Changing and Cleaning the Agitator
IMPORTANT: Always switch off the cleaner before changing the agitator.
1. Using a coin turn the lock to the open position. [14]
2. Remove the Agitator cover.
3. Remove the Agitator.
4. Replace with the new Agitator or clean it. This can only be re-fitted in one direction. [15]
5. Re- fit the Agitator cover and lock with a coin.
* Certain Models Only
• 2 points = 2/3 charge
3
• 1 point = 1/3 charge
GB