Available Accessories; Xm Tuner; Listening To Xm Satellite Radio; Switching The Xm Display - Pioneer DEH-P6100BT Manual De Instrucciones

Section
12

Available accessories

XM tuner

Listening to XM Satellite Radio

You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner's operation manual.
! With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.
% Selecting an XM band
Press BAND/ESC.
# Band can be selected from XM1, XM2 or
XM3.
% Selecting a channel
Push MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)

Switching the XM display

% Press DISP/SCRL to switch the XM dis-
play.

Selecting an XM channel directly

You can select an XM channel directly by en-
tering the desired channel number.
1 Press DIRECT on the remote control.
Channel number input display appears.
2 Use 0 to 9 on the remote control to
input the desired channel number.
# To cancel the input numbers, press CLEAR on
the remote control.
48
En
3 Press DIRECT on the remote control.
The XM channel of entered number is
selected.
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Press /LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.
Selecting the XM channel select
mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.