After Use - Beurer HT 53 Instrucciones De Uso

5. The curling tongs are supplied with a standard temperature setting of
approx. 200 °C. The operating display [8] flashes until the operating
temperature has been reached. As soon as the curling tongs have
reached the operating temperature, the operating display [8]
permanently lights up red. The curling tongs are now ready for use.
6. Put on the heat-resistant glove.
7. Separate your hair into individual sections with a width of approx.
2 cm. Wind the hair sections around the curling tongs as shown.
Hold the section of hair in place at the cool touch tip [1] using your
hand with the heat-resistant glove. Never touch the conical heating
rod of the curling tongs [2].
8. Leave the curling tongs in your hair for 8 to 10 seconds in order to
achieve the desired curling effect.
Note
After 25 minutes of operation, the operating display [8] starts to
flash. This is to show you that the curling tongs will automatically switch off in 5 minutes. The curling tongs switch off
automatically after 30 minutes of operation. Once switched off, the curling tongs are no longer heated and the operating
display [8] goes out.
Press the On/Off button [3] twice to switch on the curling tongs again.

After use

1. Press the ON/OFF button [3]. This switches off the heating in the curling tongs.
2. When the operating display [8] goes out, this indicates that the curling tongs have been switched off.
3. To cool down, place the curling tongs with the stand [9] on a stable, level and non-flammable surface or hold the curling
tongs in your hand. The stand [9] prevents the hot heating rod [2] from touching the surface.
4. After each use, pull the mains plug out of the socket.
22