Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
R-100136 is a practical Ultrasonic Bath specially designed for a wide range of applications. For a long working
life and an optimum performance, we recommend you to read carefully the following instructions:
INSTALLATION
▪
Carefully unpack the Ultrasonic Bath. Inside you will find the following accessories:
1 draining hose (M).
-
1 power cord (L).
-
1 plastic basket (K).
-
▪
Choose a flat and firm surface far from heat or vibration sources.
▪
Connect the hose (M) to the drainage pipe (D).
▪
Connect the power cord (L) to the socket of the unit (J) and to a 230 V, 50 Hz earthed power source.
▪
Open the lid (A), place the products in the basket (K) in line and then put the basket inside the tank (B).
▪
In order to prevent scratches and friction of the products, do not pile them up.
▪
Pour water into the stainless steel tank. The water should cover the products but within the min. and max.
marks.
▪
The machine is ready for operation.
CONTROL PANEL
Timer
10.
The timer counts down since the cleaning starts.
11.
Green
Orange
Red
Red blinking
All lighting
Set temperature
12.
5 temperatures can be selected. Press the key
secuence:
ºC / ºF indicator
13.
Overheat protection icon
14.
If the appliance is working improperly or has been operating for an excessive period of time, the
red warning light will illuminate, indicating that the overheating protection has operated. The
device can not be used for 15-20 minutes. Then the light will turn off and the device can be used
again.
Heating
15.
Press the key
twice to put heating off.
Normal cleaning
16.
When lighing: normal heating is acting.
To prevent accidental ignition of the heater, press the key twice in 6 seconds to turn it on or off.
State thermometer:
Water temperature between 0 and 30 % of the set temperature.
Water temperature between 30 and 60 % of the set temperature.
Water temperature between 60 and 90 % of the set temperature.
Temperature is near to set temperature.
Set temperature reached (90-100 %).
twice. Icon
will light, meaning that heating is active. Press again the key
EN
to select the temperature from the following
Publicidad
Tabla de contenido
