SEVERIN KW 3670 Instrucciones De Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
∙ After use, the scales may be switched
off by holding down the
seconds. However, the unit will switch
off automatically if no key is pressed
within a 60-second period.
Error codes
The following error codes may appear in
the display:
Display
Error
Batteries
Lo
weak
Excessive
EEEE
weight
Uneven /
unSt
unstable
surface
out 2
Unit defect
8
Battery replacement
key for 2-3
∙ The symbol 'Lo' appears if the batteries
∙ To insert or replace the batteries,
∙ Use two identical 1.5 V AAA-type
Solution
∙ During extended periods of non-use,
Replace
batteries
Max. load
3.0 kg
Position
scales on
firm, level
surface
Replace unit
Cleaning and care
∙ The housing may be wiped with a soft
∙ If necessary, clean the cover directly
∙ Do not use any abrasives, harsh
∙ Always store the scales in their
need replacing.
open the battery compartment located
underneath the unit. When inserting the
batteries, always observe the correct
polarity. Incorrectly inserted batteries
may cause damage to the unit.
batteries.
always remove the batteries from the
battery compartment. This will prevent
damage to the appliance from leakage.
Remember to protect the
environment. Never
dispose of old batteries in
domestic garbage. Old
batteries must be
disposed of through the
proper local special garbage collection
points.
dry and - if necessary - slightly damp,
lint-free cloth.
after use with warm soapy water.
cleaning solutions or aggressive
solvents for cleaning.
horizontal position and do not place any
weight exceeding 3,0 kg on the platform.

Publicidad

Tabla de contenido
loading

Tabla de contenido