Allied Vision Prosilica GC Serie Guia De Inicio Rapido página 14

Powering up the camera
Plug the 12-pin Hirose connector into the camera and wait for the boot phase to
complete.
Hirose 12-pin connector: colors and pins for power supply
When connecting an open-ended cable to a Hirose 12-pin connector, ensure
that the pins are connected to the correct wire as described in the table below.
Note that for powering up the camera, the power connection is necessary only.
1 9
2
8
10
3 11 12 7
4
6
5
Pin Color Signal
Camera
1 Blue
GND
Camera
2 Red
Power
*Some models offer 5 to 25 VDC. See the Technical Manual for
details.
I/O Level
In
---
In 5 to
16 VDC*
Description
Ground for
external
camera
power supply
Camera
power supply
14