Resumen de contenidos para Gaither BEAD BAZOOKA BB6L
Página 1
Gaither’s BB6L / BB9L / 2” BB12L Gaither Tool Company, Inc. 2255 W. Morton Ave Jacksonville, IL 62650, USA T 217-245-0545 / 800-452-5010 F 217-245-0940 sales@gaithertool.com www.gaithertool.com Gaither Europe B.V. Rechtzaad 6 4703 RC Roosendaal The Netherlands T +31 165 554475 F +31 165 568691 gaither.europe.bv@worldonline.nl...
Bead Bazooka ®( Gaither‘s BB6L / BB9L / 2“ BB12L ) Bead Bazooka Accessories ® Replacement Parts list Ref. No. Part No. Description 12910 B Air Tank w/piston valve inside 12913 B Slotted Barrel 12913 B2 2 Inch Slotted Barrel ( 2”BB12L )
Página 3
INDOOR USE ONLY DO NOT PLACE THE BARREL FIRMLY AGAINST THE RIM, but instead it should be held 2-3” away from the wheel flange when firing for better overall lift.
Página 4
GB-56 Wide Wall Clip w/4 screws Storage Clip For Bead Bazooka® GB-56 Breitwand Clip w / 4 Schrauben Lagerung Klipp für Bead Bazooka® GB-56 Amplia sujeciones de pared w / 4 tornillos lip de almacenamiento para el Bead Bazooka® GB-56 Large Clip mur w / 4 vis Stockage clip pour Bead Bazooka®...
Página 5
3. Attach an airline to your air coupler nipple and open the intake valve to fill the air tank to the desired working pressure. (see proper storage and unit charging recommendation –next page) Normal working pressure is 5) Position the Bead Bazooka™ so that the slotted from 20 to 150 psi / 1.5 to 10 bar – Gaither’s BB6L; Normal working pressure is from 20 to 150 psi / double barrel opening is pointing directly into 1.5 to 10 bar – Gaither’s BB9L. The amount of pressure that is needed in the tank depends on the tire size the largest gap between the tire and wheel. ...
Página 6
Sicherungsmutter auf und ziehen Sie diese kräftig an, damit das geschlitzte Doppelrohr sicher festsitzt. - nächste Seite). Normaler Arbeitsdruck zwischen 20 und 150 psi / 1.5 bis 10 bar – Gaither’s BB6L; Normaler Anwendung der Bead Bazooka™ mit Reifen und Felge in horizontaler Position: Arbeitsdruck zwischen 20 und 150 psi / 1.5 bis 10 bar –...
Página 7
índice sobre el disparador. Tire normal de trabajo es de 20 a 150 psi / 1.5 – 10 bar – Gaither’s BB6L; La presión normal de trabajo es de 20 a 150 psi / suavemente para liberar el aire del interior del tanque.
Página 8
AVERTISSEMENT : APRÈS LA MISE EN PLACE DU TALON CONTRE L'ÉPAULEMENT DE LA ait pas d’obus dans la valve. Utilisez un tuyau de gonflage ou un tuyau Gaither Whip Hose (GB-52) pour gonfler le pneu tout en JANTE, ARRETE LE GONFLAGE ET INSÉREZ L’OBUS DE VALVE. PLACEZ LA ROUE DANS UNE déclenchant simultanément le Bead Bazooka™.
Página 9
Prima di utilizzare Bead Bazooka™ bisogna installare i seguenti elementi: BB6L; La normale pressione di esercizio va da 20 a 150 psi / 1.5 – 10 bar – Gaither’s BB9L.. La quantità di pressione 1) Il raccordo filettato dell’aria non è incluso. Montare un raccordo filettato dell'aria adatto al vostro particolare sistema nella necessaria nella bombola dipende dalle dimensioni dello pneumatico e dalle sue condizioni.
Página 10
1) De luchtnippel is niet inbegrepen. Monteer in het kleine inlaatventiel (a) dat hierboven is weergegeven een tot 150 psi / 1.5 tot 10 bar – Gaither’s BB6L; De normale bedrijfsdruk is 20 tot 150 psi / 1.5 tot 10 bar –...