KENMORE ELITE HE3 Steam 110.86742 Manual De Uso Y Cuidado página 23

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Auto Dry Preset Cycle Settings
Auto Cycles
Temperature
Time*
Load Type
(Minutes)
NORMAL
Medium
40
Corduroys, work clothes,
sheets
JEANS
Medium High
55
Denim jeans, jackets
HEAVY DUTY
High
45
Heavyweight mixed loads,
cotton towels, bedspreads
CASUAL
Low
35
Permanent press,
synthetics
DELICATE
Extra Low
30
Lingerie, blouses, washable
knit fabrics
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary dependings on load type and load size.
SteamCare Cycles
Use SteamCare Cycles to help smooth out wrinkles from dry
items, such as clothes that have been worn or clothes that have
been left in the dryer too long. When the SteamCare Cycle is
selected, the estimated time remaining display shows the actual
time remaining in the cycle,
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without.
Use of a fabric softener sheet is not recommended
with
steam cycles as it may cause temporary staining on the
clothes.
Refresh with SteamCam
This cycle is best for smoothing out wrinkles and reducing odors
from loads consisting of one to four dry items of wrinkle-free
cotton, cotton-polyester
blend, common knits and synthetic
garments. In this cycle a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat. The
dryer will continue to tumble with heat followed by a brief cool
down. The heat level and cycle time are not adjustable.
Touch Up with SteamCare
This cycle is best for touching up clothes that have been left in
the dryer too long. In this cycle, a small amount of water is
sprayed into the dryer drum after several minutes of tumbling
with heat. The dryer will continue to tumble with heat followed by
a brief cool down. The dry time and temperature can be adjusted
for this cycle.
NOTE: Overloading the dryer may not yield the same results.
SteamCare Preset Cycle Settings
Timed Cycles
Default
Default Time
Load Type
Temperature*
(Minutes)*
REFRESH
Medium High
15
Helps to smooth out
wrinkles and reduce odors
from loads consisting of
one to four dry items.
TOUCH UP
Medium High
20
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.
*Temperature and time are selectable only for the Touch Up
Cycle.
NOTE: The Touch Up cycle has a minimum dry time of
15 minutes and a maximum dry time of 40 minutes. Only the
Medium, Medium High, and High temperature settings can
be used for the Touch Up cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and
a drying temperature.
When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing More Time or Less Time. See "Changing
Cycles, Options and Modifiers."
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Cycle. Timed Dry is also useful for drying heavyweight and
bulky items, such as bedspreads and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry
on a low temperature setting. Timed Dry can also be used with
the Tumble Free Heated Dryer Rack.
EXPRESS
DRY
TM
Use this cycle for drying small loads or loads that need a short
drying time.
Air Fluff
Use this cycle for items that require drying without heat such as
rubber, plastic and heat-sensitive
fabrics. This table shows
examples of items that can be dried using Air Fluff. The
temperature setting is not adjustable with this cycle.
Type of Load
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - Shower curtains, tablecloths
20 - 30
Rubber-backed
rugs
40 - 50
Olefin, polypropylene,
sheer nylon
10 - 20
*Reset cycle to complete drying, if needed.
23

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

He3 steam 110.86762

Tabla de contenido