Hoover Prodige PR50PAR 011 Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. Dust Container Flap
B. Dust Container
C. Main Cleaner
D. Variable Power Control Slider**
D1. LED display with touch controls**
E. On/Off Pedal
F. Pre-Motor Filter Cover
G. Bin Handle
H. Bin Flap Release Button
I. Hose End Latch Button
J. Hose
K. Hose Handle**
L. Suction Regulator*
M. Telescopic Extension Tube**
Ma Telescopic Tube Latch*
Mb. Telescopic Tube Adjuster**
N. Carpet and Floor Nozzle Latch*
O. Pre-Motor Filter
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Fit the bin assembly to the cleaner making sure the hook has been positioned correctly
in the main body. Then lock the container in place by pushing the bin handle down
until the latch connects with the main body of the cleaner, you will hear a click when
fully connected. [14]
2. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release the hose: simply press the hose end latch button on the hose end and pull. [1]
3. Connect the hose handle to the end of the extension tube upper [2a], or accessories
if required. [2b]
4. Connect the extension tube lower to the carpet and floor nozzle** [3a] or accessories
if required. [3]
5. The cleaning accessory tools* can be stored after use on the underside
of the extension tube, using the accessories holder provided*.
*Certain Models Only **May vary according to models
P. Exhaust Filter
Q. Exhaust Filter cover
R. Pre-Motor Filter Cover Latch
S. Parking slot
T. Bin Release Latch
U. Carpet and Floor Nozzle (GP)**
U1. Hard Floor Nozzle (HF)**
U2. Carpet nozzle (CA)**
V. Carpet & Floor Nozzle Slider*
W. Floor Type Selector Pedal*
X. Accessories Holder*
X1. Crevice Tool*
X2. Dusting Brush**
X3. Furniture Nozzle*
Y. Pet Hair Remover Mini Turbo Nozzle*
Z. Allergen Remover Mini Turbo Nozzle*
AA. Parquet Nozzle*
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the red
marker. [5]
2. Adjust the extension tube** to the desired height by moving the extension tube adjuster**
up and raise or lower to the most comfortable cleaning position. [6]
3. After connecting the telescopic tube lower end to Carpet and Floor Nozzle** or accessories
if required, press the floor type selector* pedal on the nozzle to select the ideal cleaning
mode for the floor type:
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
Carpet & Floor Nozzle**: [4]
- Hard floor Cleaning: Press the pedal on the nozzle on Hard Floor mode and adjust
the slider on the nozzle on ALL FLOORS. In this position brushes, wheels and wiper
blade are lowered to protect hard floors. [4a]
- Standard Carpet & Rugs Cleaning: Press the pedal on the nozzle on Carpet mode
and adjust the slider on the nozzle on ALL FLOORS. In this position brushes and
wiper blade are raised while wheels are lowered to allow a perfect ease of movement
on such surfaces. [4b]
- Deep Carpet cleaning: Press the pedal on the nozzle on Carpet mode and adjust the
slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels
and wiper blade are raised for a deeper cleaning of your carpet. [4c]
WARNING: It is recommended to avoid potential scratching of wooden floors that the
pedal is not set on hard floor mode and the slider on deep carpet cleaning.
4. Switch the cleaner on by pressing the on/off pedal on the cleaner main body. [7]
5. Adjust the power level by pressing the variable power control buttons on the display** or by
adjusting the variable power control slider**. [D1** & D**]
6. Adjust the suction by moving the suction regulator* to the desired level. [8]
7. Switch the cleaner off at the end of use by pressing the on/off pedal. Unplug and pull the
power cord again to wind the power cord back into the cleaner. [5]
Parking and storage – The tube can be parked on the back of the cleaner for storage or
temporary storage while in use.
ACCESSORIES
To obtain the best performance and efficiency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams
by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
2
GB