Product Maintenance - Chauvet Professional EPIX BAR 2.0 Guía De Referencia Rápida

ÉPIX™ Bar 2.0 QRG

Product Maintenance

To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
Cleaning the ÉPIX™ Bar 2.0:
1. Unplug the product.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents and accessible internal components.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner
or isopropyl alcohol.
5. Apply a solution directly to a soft, lint-free cotton cloth or a lens cleaning
tissue.
Wipe any dirt or grime to the outside edge of the surface. Gently polish the
surfaces with the lint-free cotton cloth or lens cleaning tissue until they are free of
haze and lint. Always dry the external surfaces carefully after cleaning them.
Expected LED Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs' lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours.
If extending this lifespan is vital, lower the operating temperature by improving the
ventilation around the product and reducing the ambient temperature to an optimal
operating range. In addition, limiting the overall projection intensity may also help to
extend the LED's lifespan.
Page 10 of 40
EN
ÉPIX™ Bar 2.0 QRG