toolport Wikinger Marine Serie Manual De Instrucciones página 5

Caution!
1. Please find a flat and even ground base to pitch the tent.
2. Only those materials provided with the tent can be used.
3. Please check whether the ground base is suitable for your purpose.
4. The tent can be used also during temperatures a few degrees below zero. However, prior to such use, the tarp material
must be stored in temperature of at least 10°C for a sufficiently long time, and then unwrapped at such, or higher tempe-
rature. Otherwise, the material may break at points of folds.
5. Bungees are consumable parts. Used bungees must be replaced.
6. Each country has separate regulations regarding movable structures (tents) and unmovable structures. Please ask your
local authorities whether a permission be obtained to pitch the tent. In some countries this depends on the size of the tent.
7. The tarps should not come into contact with any objects with sharp edges.
Before first usage
1. Please unpack the cartons and check against the packing list enclosed whether all parts have been delivered.
2. Metal parts have been covered by a thin film of lubricant in the manufacturer's plant. Some parts may have more than
the ordinary amount of lubricant on them. In such case, use a cloth to remove excess lubricant. Please excuse us for that.
3. Please reserve some more time for your first installation of the tent. The rules to be followed when pitching the tent are
simple. Please use the illustrative instructions for each step of installation.
4. The screws joining the pipes with connectors must be tightened manually, using a hexagon key or an automatic screw
driver, set at a max. level 2, to avoid material wear.
Cleaning and storage
1. Please do not use agressive chemicals to clean the tarp material. The best cleaning agent is water with slightly alkaline
reaction.
2. The tent should not be folded and packed when wet. First dry it thoroughly.
3. Do not make any modifications of the metal structure of the tent, such as for example, connecting and/or welding
additional loads, making grooves and/or any deformations.
4. Please be careful when handling individual components of the tent. During disassembly, please use the lopacking list
again to check the possible missing parts, so as to avoid problems with next assssembly.
5. Do not put any objects on the tent when stored in a dry place.
Environment
After the end of usage, please do not dispose of the tent or any of its components with ordinary garbage, but recycle it. If
in doubt, please ask the manufacturer or an authorised sales representative. We will be happy to help you recycle the tent
correctly, at the same time preserving the environment.
5