Assembly - Husky HOTC5205JX1M Guía De Uso Y Cuidado

Assembly

1
Attaching the side handle
□ Attach the side handle (B) to the cabinet using four bolts
( )
BB .
□ Tighten all bolts with the 10 mm wrench (DD).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
BB
3
Attaching the power strip brackets
□ Attach the power strip brackets (H) to the cabinet using four
bolts (AA).
□
Tighten all bolts using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
B
□
H
AA
2
Installing the casters
CAUTION: Do not over tighten the screws.
NOTE: Two people may be required to complete this step.
□ Ensure all drawers are securely locked into place using
the key (I) and lock (J) on the rolling cabinet (C).
□ Lay the rolling cabinet (C) on its back. Use the
packaging material to protect the finish.
□ Mount the two swivel casters with brake (D) to the rolling
cabinet (C) using four bolts (CC) per caster. The s wivel
casters with brake (D) should be installed on the same
side as the side handle (B) .
□ Mount the two rigid casters (G) to the rolling
cabinet (C) using four bolts (CC) per caster.
□ Tighten all bolts with a 13 mm wrench (DD).
□ Return the rolling cabinet (C) to its upright position.
G
CC
4
Installing the shelf brackets and shelf
□ Install the four shelf brackets (L) inside the storage area at
the desired shelf height location.
□ Ensure all shelf brackets are aligned horizontally and are
properly seated in the bracket slots.
□
Install the shelf (M) inside the storage area so that it sits on
top of the four shelf brackets (L) flush and level.
L
6
C
B
D
M