Dmx Mode - Beamz MHL108 Wash MK3 18x 3W RGB Manual De Instrucciones

DISPLAY

DMX MODE

This mode allows you to use universal DMX-512 console to operate.
1. Install the units in a suitable position.
2. Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For
longer cable we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit using dipswitches.
4. Turn on all units. Use DMX console to control your units.
DMX Signal
Press "UP" or "DOWN" to choose functions in the same menu.
Press "ENTER" button to enter next menu.
Press "MODE" button to return previous menu.
Main Menu Second Menu
ADDR
DMX Adress
CHND
Channel Mode
SLND Master/Slave
SOUN Sound Sensitivity
AUTO
Auto mode
STBY Boot pause mode
PAN X-motor forward/reverse
TILT
Y-motor forward/reverse
LED
Digital display ON/OFF
DISP Digital display
TEST
Function self-checking
HOUR Machine time record
RSET Reset self-checking
Third Menu
A001-A512
6CH
11CH
NAST
SL1
SL2
0-100
NO
YES
NO
YES
NO
YES
NO
YES
ON
OFF
ON
OFF
7