Palmer Peabo AB-O Manual De Usuario página 5

PANELS
5
4
2
3 5
INSTALLATION & OPERATING:
1
GROUND LIFT SWITCH
With the ABO you can interconnect
two mains powe red devices (for
example 2 mixers). This constel-
lation can induce a ground loop
hum. Should this occur, use this
switch to lift the ground of the
3
second output.
2
SWITCH
6
With this switch you can toggle
between the two outputs. The
switch is latching, the LED indi-
1
cates, which output is active.
GND
3
INPUT
(Note: Only dynamic mic and such
that do not require phantom pow-
er.)Connect a mic or line signal
to this input
Outputs: The input signal is
switched to either output A or B
(LED on).
4
PAD OUTPUT A
Use this switch to attenuate the
output A by 15dB.
5
PAD OUTPUT B
To offer more flexibility, out-
put B can be padded in two steps
(15dB or 6dB). Both switches can
3 4
be used simultaneously to acheive
maximum pading.
6
LED
LED: This LED lights when output
B is selected (Note: A battery
must be inserted)
5