System Type; Save/Load System Menu - dBTechnologies INGENIA IG3T Manual Del Usuario

SYSTEM TYPE

The system types available when using the IG3T are 2:
• Stacked
• Flown
In the "Stacked" configuration an IG3T speaker rests on a stand, or one or 2 speakers rest on a subwoofer (see
chapter INSTALLATION EXAMPLES); in the "Flown" configuration, instead, one or two IG3T speakers are hanging.
After accessing the SYSTEM TYPE menu, then:
• Select and confirm the desired mode, choosing between "Stacked" and "Flown"; select and confirm
to access the next screen (select and confirm
previously detected the presence of 2 speakers, it will switch to the
presence of a woofer has been selected in the previous
the SUBWOOFER MATCHING
be the initial one, and the procedure will end.
ATTENTION!
• Never install the speaker directly resting on the ground, but always use
the optional GSA-IG.
• When "Stacked" on a tripode stand, the INGENIA IG3T cannot be
mounted in the configuration with 2 speakers stacked, but only in a
single speaker configuration, for safety reasons.

SAVE/LOAD SYSTEM MENU

This menu allows to save and then recall the system usage configurations.
Even though at switch-off the IG3T retains all the information about the
latest settings, it may be useful to have at one's disposal, for different
contexts, a previously saved batch of appropriate settings, and to be able
to quickly reload them. To this purpose, IG3T allows to save and rename 5
batches of settings, using the "SAVE" function, and to recall them using the
"RECALL" function. Should you later have to edit the settings stored in one
of the memory slots, you can later overwrite the previously saved slots.
INGENIA IG3T
56
BACK to return to the previous one). Now, if the system has
menu; should that not be the case (Speakers 1, Subwoofer 0) the next screen will
SYSTEM COVERAGE
SYSTEM STRUCTURE sub-menu, it will then switch to
Save/Load System Menu
English
NEXT
menu, and if the
Cod. 420120239 REV. 1.1