Cleaning The Drain Pump Filter - Sears Kenmore 796.4116 Serie Manual De Uso

MAINTENANCE (continued)
Cleaning the Drain Pump Filter
Your Washer is equipped with a filter that helps prevent excess
lint and foreign objects like buttons, keys, and coins from
causing damage to the pump. If the washer fails to drain
properly, unplug the washer and allow the water to cool, if
necessary, before proceeding.
O Open the drain pump filter access panel.
Plug
J
Remove the from the drain and allow the
plug hose,
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container several times.
Drain Hose
O Unclip the drain hose and pull it out. Place the end
of the drain hose into a shallow pan or a floor
drain. Make sure not to pull the hose out too far, or
it may not drain properly.
Pump Filter
OTwist pump to remove.
the filter counterclockwise
Remove any lint and foreign objects from the pump
filter. Insert pump filter back into opening and twist
clockwise to secure. Be sure to close the drain pump
filter access panel.
26