Specific Safety Rules And Symbols - ACDelco ARD1296 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with 'live' wire will also
make exposed metal parts of the tool 'live' and shock the operator.
Be aware that this tool is always in an operating condition, because it does not
have to be plugged into an electrical outlet. Always set the trigger switch to the
locked OFF position when installing or removing the battery pack or bits.
Do not use bits or sockets larger than those recommended. Large bits or drills
may overload the wrench/driver and damage the motor and gears.
Do not use if chuck jaws or other parts are cracked or worn.
Never change direction of rotation until motor has completely stopped.
Never hold work in your hand, lap, or against other parts of your body when
driving.
Do not use drill as a router or try to elongate or enlarge holes by twisting the
drill bit. Drill bits may break and cause injury.
Keep hands away from rotating parts.
Keep drill bit clear of yourself and all objects while installing and removing bit.
Some wood contains preservatives which can be toxic. Take extra care to prevent
inhalation and skin contact when working with these materials. Request, and follow,
all safety information available from your material supplier.
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
SYMBOL
V
n
o
kg
.../min
1English1

SPECIFIC SAFETY RULES AND SYMBOLS

NAME
Volts
No Load Speed
Kilograms
Direct Current
Revolutions per
Minute
SYMBOLS
EXPLANATION
Voltage (potential)
No-load Rotational Speed
Weight
Type of Current
Revolutions, Surface Speed, Strokes, etc.
per Minute
English
-6

Publicidad

Tabla de contenido
loading

Tabla de contenido