Publicidad
Idiomas disponibles
Idiomas disponibles
–
Ensure that sparks resulting from use do not
create a hazard e.g. do not hit persons, or ignite
fl ammable substances;
–
Ensure that ventilation openings are kept
clear when working in dusty conditions, if it
should become necessary to clear dust, fi rst
disconnect the tool from the mains supply
(use non metallic objects) and avoid damaging
internal parts;
–
Always use eye and ear protection. Other
personal protective equipment such as dust
mask, gloves, helmet and apron should be
worn;
–
Pay attention to the wheel that continues to
rotate after the tool is switched off .
SPECIFIC SAFETY RULES AND
SYMBOLS
1. Accessories must be rated for at least the
speed recommended on the tool warning
label.
Wheels and other accessories running over
rated speed can fl y apart and cause injury.
2. Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the
operator.
3. Always wear ear protectors when using the
tool for extended periods.
Prolonged
intensity noise can cause hearing
loss.
4. Never touch moving parts.
Never place your hands, fi ngers
or other body parts near the tool's
moving parts.
5. Never operate without all guards in place.
Never operate this tool without all guards or
safety features in place and in proper working
order. If maintenance or servicing requires the
removal of a guard or safety feature, be sure
to replace the guard or safety feature before
resuming operation of the tool.
6. Use right tool.
Don't force small tool or attachment to do the
job of a heavy-duty tool.
Don't use tool for purpose not intended —for
example— don't use circular saw for cutting
tree limbs or logs.
exposure
to
high
7. Never use a power tool for applications
other than those specifi ed.
Never use a power tool for applications other
than those specifi ed in the instruction manual.
8. Handle tool correctly.
Operate the tool according to the instructions
provided herein. Do not drop or throw the tool.
Never allow the tool to be operated by children,
individuals unfamiliar with its operation or
unauthorized personnel.
9. Keep all screws, bolts and covers tightly in
place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
10. Do not use power tools if the plastic
housing is cracked.
Cracks in the tool's housing or handle can lead
to electric shock. Such tools should not be used
until repaired.
11. Accessories must be securely mounted to
the tool.
Prevent potential injuries to youself or others.
Blades, cutting implements and accessories
which have been mounted to the tool should be
secure and tight.
12. Keep motor air vent clean.
The tool's motor air vent must be kept clean so
that air can freely fl ow at all times. Check for
dust build-up frequently.
13. Never use a tool which is defective or
operating abnormally.
If the tool appears to be operating unusually,
making
strange
appears defective, stop using it immediately
and arrange for repairs by a metabo HPT
authorized service center.
14. Never leave tool running unattended. Turn
power off .
Don't leave tool until it comes to a complete
stop.
15. Carefully handle power tools.
Should a power tool be dropped or struck
against hard materials inadvertently, it may be
deformed, cracked, or damaged.
16. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine,
carbon tetrachloride, and alcohol may damage
and crack plastic parts. Do not wipe them with
such solvents.
Wipe plastic parts with a soft cloth lightly
dampened
with
thoroughly.
17. Never use the grinder in places where the
sparks generated by the grinder can cause
explosion, such as where fl ammable materials
or gases are present.
English
noises,
or
otherwise
soapy
water
and
dry
7
Publicidad
