Operating Instructions - Kenmore 125.10341 Manual De Uso Y Cuidado

CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the brush roll when vacuum is on.
Contacting the brush roll while it is rotating can cut,
or cause other injuries. Always turn off before servicing.
Use caution when operating near children.
CONTROL PANEL
The control panel is located on the top of
the handle, which includes:
Power Icon=On/Off
Speed Indicator=Low/High
Battery Indicator
= Electric Capacity
WARNING
Do not operate vacuum cleaner without
filter in place.
Before vacuuming, check that the brush
wheels and brush roll are clear of any
sharp objects to avoid scratching floors.
Use low speed for surface cleaning of bare
floors or low pile rugs and carpets or when
increased runtime is needed.
Use high speed for cleaning of plush rugs
and carpets or when additional cleaning
power is required.

OPERATING INSTRUCTIONS

USING YOUR VACUUM CLEANER
Vacuum Operation:
1. Touch the power icon to illuminate
control panel and initiate power.
NOTE: If no further action is taken in 5
seconds, panel returns to previous state.
2. Start the vacuum cleaner by touching
the power icon once more. The speed bars
will illuminate allowing for speed control.
- 9 -