Button Functions - Philips SRU6061 Manual Del Usuario

Button Functions

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
4
Button Functions, cont.
1. Red Indicator Lights when any button is pressed.
2. TV, DVD, SAT, AUX, VCR, CBL Selects product to
25.
be operated.
3. SETUP Used for setup.
24. 4. 100+ Used for channels greater than 100. (-) Used
for digital sub channels.
5. GUIDE brings up the DVD Title Menu screen.
23.
Displays on-screen program guide.
6. MENU brings up the DVD disc Menu screen - use with
22.
the UP, DOWN, LEFT & RIGHT navigation buttons.
7. VOLUME UP/DOWN Changes the volume level of
21.
the product, normally the TV.
8. UP, DOWN, LEFT & RIGHT navigation buttons.
20. 9. OK Selects menu items for the device you are
controlling.
10. MUTE Turns off the TV sound while the picture
19.
remains.
11. TV/VCR/INPUT For some TVs, press repeatedly to
18.
select from available viewing sources (antenna,
cable box, VCR, etc.).
17.
12. SLEEP Turns off the TV after a period of 1 to 99
minutes. Brings up DVD Subtitle Menu.
13. CC TV Closed Caption (if your TV has this feature)
16.
or DVD Subtitle toggle.
14. RECORD, PLAY, STOP, REW, FF, PAUSE
15.
VCR control buttons operate your VCR even when
the remote is set to operate the TV. Also operates
14.
DVD Scan -/+.
15. PIP TV Picture-in- Picture control.
16. SWAP Swaps the PIP screens.
17. LAST Returns to the previously selected channel,
or DVD repeat toggle. Performs DVD players "A-B
Repeat" (or RPT A.B) function for repeat play of
current Chapter or Track.
18. ZOOM Zoom or enlarge a specific area of the screen.
19. CHANNEL UP/DOWN Changes the channels.
Controls DVD/CD track selection i.e. DVD/CD Track
Skip Up/Down (in DVD and SAT modes). Note the
VCR buttons also control DVD when in DVD Mode.
20. QUIT Used to exit menu functions.
21. INFO Displays/selects on-screen channel information.
22. ENTER Used after direct channel number entry to
immediately change to the selected channel.
23. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
24. LEARN Used to setup learning functions.
25. POWER Turns product On or Off.
5