Schneider Airsystems KLG 114-65 Manual De Instrucciones página 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components ............................
1.6 Commissioning.........................
1.7 EC Declaration of Conformity .....
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
1.4 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Compatible staplers (length)
Staple type
Staple back width, type 114
Wire thickness
Magazine capacity
Pulse sound pressure level L
as per DIN 45 635, part 66
Pulse sound power level L
as per DIN 45 635, part 66
Vibration (under load) as per DIN EN 28 662, Part1
Contact trigger
Insertion depth adjustment
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
04 Magazine
05 Magazine slide
06 Trigger safety device
08 Depth setting
3
3
3
3
3
3
4
(at distance of 1 m)
pa 1m
wa
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.2 Scope of delivery
– Stapler
– Allen wrench
– Safety glasses
– Tool oil
– Instruction manual
1.3 Conventional use
The compressed air tool is an industrial tool
suitable for:
Securing gypsum fibreboard, chip board and
OSBs, pallets and boxes.
Any other type of use is considered contrary
to the intended use.
369 x 98 x 338 mm
11 Exhaust air guide
12 Quick-release cover
13 Reversing lever
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
GB
KLG 114-65
1.25 l/impact
8 bar
5 - 8 bar
32 - 65 mm
114
10.8 mm
1.6 x 1.4 mm
130 Piece
83.6 dB(A)
96.6 dB(A)
2
3.17 m/s
Yes
Yes
9 mm
2.5 kg
I/ 3